logo
ผลิตภัณฑ์
ราคาดี  ออนไลน์

รายละเอียดสินค้า

บ้าน > ผลิตภัณฑ์ >
หลอดครีบหยัก
>
ASTM A312 TP347H Stainless Steel Serrated Fin Tube for Furnace
ประเภททั้งหมด
ติดต่อเรา
Ms. Sia Zhen
+8615058202544
ติดต่อตอนนี้

ASTM A312 TP347H Stainless Steel Serrated Fin Tube for Furnace

ชื่อแบรนด์: Yuhong
เลขรุ่น: ASTM A312 TP347H
ขั้นต่ำ: 100 กก
ราคา: โปร่ง
รายละเอียดการบรรจุ: กล่องไม้ที่มีโครงเหล็ก
เงื่อนไขการจ่ายเงิน: แอล/C,ที/ที
ข้อมูลรายละเอียด
สถานที่กำเนิด:
จีน
ได้รับการรับรอง:
ABS, CCS, BV, LR,
ประเภทครีบ:
HFW FIN TUBE
วัสดุครีบ:
SS304H
ครีบหนา:
0.8mm-3mm
วัสดุท่อฐาน:
ASTM A312 TP347H
แถบครีบ:
เกี่ยวกับเซเรเรด
กระบวนการผลิต:
วาดเย็น
สพท:
ECT, HT
แอปพลิเคชัน:
เตาเผา
สามารถในการผลิต:
1000 ตันต่อตัน
เน้น:

ASTM A312 TP347H stainless steel fin tube

,

serrated fin tube for furnace

,

stainless steel serrated finned tube

คําอธิบายสินค้า

ASTM A312 TP347H Stainless Steel Seamless Pipe, Serrated Fin Tube, For Furnace Tube


Product Overview

ASTM A312 TP347H is a high-temperature, stabilized austenitic stainless steel with added columbium (niobium) for improved creep strength. When made into Serrated Fin Tubes using High-Frequency Welding (HFW), this tube becomes ideal for furnace convection sections, offering enhanced heat transfer efficiency and extended service life under cyclic thermal stress and oxidizing conditions.


Chemical Composition – ASTM A312 TP347H

ElementContent (%)
C0.04 – 0.10
Mn≤ 2.00
P≤ 0.040
S≤ 0.030
Si≤ 1.00
Cr17.0 – 19.0
Ni9.0 – 13.0
Nb (Cb)10 × C min
FeBalance

Mechanical Properties – TP347H

PropertyValue
Tensile Strength≥ 515 MPa
Yield Strength≥ 205 MPa
Elongation≥ 35%
Hardness (HBW)≤ 192 HB
Max. Working Temp~ 1050°C (1922°F)

Advantages of TP347H Serrated Fin Tube

  • High Temperature Resistance
    Ideal for superheaters, heaters, and furnaces, TP347H withstands long-term service at elevated temperatures without creep deformation.

  • Improved Heat Transfer Efficiency
    The serrated fin design increases turbulence and surface area, boosting heat transfer while minimizing fouling.

  • Oxidation & Corrosion Resistance
    Excellent performance in oxidizing atmospheres, especially in fuel-fired furnaces.

  • Creep-Strength Enhanced
    Addition of niobium enhances structural stability under high stress and thermal cycling.

  • Weldability and Fabrication
    Good weldability with standard procedures; suitable for custom-designed fin configurations.


Application in Furnace Systems

The Serrated Fin Tube made of ASTM A312 TP347H is specifically used in:

  • Convection Section of Furnaces
    Absorbs radiant heat and transfers it efficiently to the working fluid (steam, oil, or gas).

  • Heater Banks & Superheaters
    Installed where both thermal efficiency and material durability are critical.

  • Refinery Fired Heaters
    In hydrocarbon processing, TP347H fin tubes are used in crude, reformer, and hydrotreater furnaces.

ASTM A312 TP347H Stainless Steel Serrated Fin Tube for Furnace 0

สินค้าที่เกี่ยวข้อง
หา ราคา ที่ ดี ที่สุด
ราคาดี  ออนไลน์

รายละเอียดสินค้า

บ้าน > ผลิตภัณฑ์ >
หลอดครีบหยัก
>
ASTM A312 TP347H Stainless Steel Serrated Fin Tube for Furnace

ASTM A312 TP347H Stainless Steel Serrated Fin Tube for Furnace

ชื่อแบรนด์: Yuhong
เลขรุ่น: ASTM A312 TP347H
ขั้นต่ำ: 100 กก
ราคา: โปร่ง
รายละเอียดการบรรจุ: กล่องไม้ที่มีโครงเหล็ก
เงื่อนไขการจ่ายเงิน: แอล/C,ที/ที
ข้อมูลรายละเอียด
สถานที่กำเนิด:
จีน
ชื่อแบรนด์:
Yuhong
ได้รับการรับรอง:
ABS, CCS, BV, LR,
หมายเลขรุ่น:
ASTM A312 TP347H
ประเภทครีบ:
HFW FIN TUBE
วัสดุครีบ:
SS304H
ครีบหนา:
0.8mm-3mm
วัสดุท่อฐาน:
ASTM A312 TP347H
แถบครีบ:
เกี่ยวกับเซเรเรด
กระบวนการผลิต:
วาดเย็น
สพท:
ECT, HT
แอปพลิเคชัน:
เตาเผา
จำนวนสั่งซื้อขั้นต่ำ:
100 กก
ราคา:
โปร่ง
รายละเอียดการบรรจุ:
กล่องไม้ที่มีโครงเหล็ก
เวลาการส่งมอบ:
ตามจำนวน
เงื่อนไขการชำระเงิน:
แอล/C,ที/ที
สามารถในการผลิต:
1000 ตันต่อตัน
เน้น:

ASTM A312 TP347H stainless steel fin tube

,

serrated fin tube for furnace

,

stainless steel serrated finned tube

คําอธิบายสินค้า

ASTM A312 TP347H Stainless Steel Seamless Pipe, Serrated Fin Tube, For Furnace Tube


Product Overview

ASTM A312 TP347H is a high-temperature, stabilized austenitic stainless steel with added columbium (niobium) for improved creep strength. When made into Serrated Fin Tubes using High-Frequency Welding (HFW), this tube becomes ideal for furnace convection sections, offering enhanced heat transfer efficiency and extended service life under cyclic thermal stress and oxidizing conditions.


Chemical Composition – ASTM A312 TP347H

ElementContent (%)
C0.04 – 0.10
Mn≤ 2.00
P≤ 0.040
S≤ 0.030
Si≤ 1.00
Cr17.0 – 19.0
Ni9.0 – 13.0
Nb (Cb)10 × C min
FeBalance

Mechanical Properties – TP347H

PropertyValue
Tensile Strength≥ 515 MPa
Yield Strength≥ 205 MPa
Elongation≥ 35%
Hardness (HBW)≤ 192 HB
Max. Working Temp~ 1050°C (1922°F)

Advantages of TP347H Serrated Fin Tube

  • High Temperature Resistance
    Ideal for superheaters, heaters, and furnaces, TP347H withstands long-term service at elevated temperatures without creep deformation.

  • Improved Heat Transfer Efficiency
    The serrated fin design increases turbulence and surface area, boosting heat transfer while minimizing fouling.

  • Oxidation & Corrosion Resistance
    Excellent performance in oxidizing atmospheres, especially in fuel-fired furnaces.

  • Creep-Strength Enhanced
    Addition of niobium enhances structural stability under high stress and thermal cycling.

  • Weldability and Fabrication
    Good weldability with standard procedures; suitable for custom-designed fin configurations.


Application in Furnace Systems

The Serrated Fin Tube made of ASTM A312 TP347H is specifically used in:

  • Convection Section of Furnaces
    Absorbs radiant heat and transfers it efficiently to the working fluid (steam, oil, or gas).

  • Heater Banks & Superheaters
    Installed where both thermal efficiency and material durability are critical.

  • Refinery Fired Heaters
    In hydrocarbon processing, TP347H fin tubes are used in crude, reformer, and hydrotreater furnaces.

ASTM A312 TP347H Stainless Steel Serrated Fin Tube for Furnace 0

สินค้าที่เกี่ยวข้อง
หา ราคา ที่ ดี ที่สุด